City Gate is an automatic barrier characterized by a large perimeter edge, with the function of delimiting the inner planter and to cover the sliding mechanism.
It is equipped with one or two moving barriers housed internally, between the tank and the external side of the planter. The barriers extend from the sides of the planter to prevent the vehicular traffic.
This automatic barrier is supplied completely wired, assembled and tested. It is equipped with safety photocell, limiting mechanism of the forces, integrated warning signal and intermittent light signal, manual unblocking and automatic opening in the case of a power failure.
Installation: The fitting is quick and simple as no excavation is required, the barrier must only be connected to the power supply line.
Safety devices: City Gate is equipped with photocells, acoustic warning signal and flashing lights for signaling when the barrier is in motion. The barrier can also be supplied with traffic lights and road signs, on request.
Design: City Gate barrier is the perfect solution for traffic management in the pedestrian areas of the city, thanks to its nice appearence and the possibility to add flowers or plants inside.
Accessories: It can be activated via different access control systems such as code switches, key switch, card readers, transmitters and weekly / yearly timers.
SMALL SX: left version, made of 2 modules (cm 160x67x90h), one sliding barrier of 120 cm.
SMALL DX: right version, made of 2 modules (cm 160x67x90h), one sliding barrier of 120 cm.
BIG SX: left version, made of 3 modules (cm 235x67x90h), one sliding barrier of 170 cm.
BIG DX: right version, made of 3 modules (cm 235x67x90h), one sliding barrier of 170 cm.
BIG: made of 3 modules (cm 235x67x90h) and 2 sliding barriers of 170 cm.
Actual product may differ from image shown